Duracell Powerpack 300 Spezifikationen PDF herunterladen (Seite 6)

WARNING: Heated surface

Ensure at least 2” (5 cm) air space is maintained on all

sides of the Duracell

Powerpack. During operation,

keep away from materials that may be affected by high

temperatures such as blankets, pillows and sleeping bags.

WARNING: Fire hazard

Never allow jump-start cables’ red and black clamps to

touch each other or another common metal conductor. This

could cause damage to the unit and/or create a sparking/

explosion hazard. Always disconnect the jump-start cables

from the unit after use and clip the plastic guard over the

jump-start cable port.

WARNING: Fire hazard

Jump-start cable clamps must be connected positive to

positive (red clamp to battery “+”) and negative to negative

(black clamp to battery “–”). A reverse polarity connection

(positive to negative) may cause damage to the unit and/or

create a sparking/explosion hazard.

WARNING: Fire hazard

The jump-start feature is designed for short term operation

only—less than 4 seconds. Operating the Jump-start

feature for more than 4 seconds may cause damage to

the unit. Allow the Duracell

Powerpack to cool down for at

least 3 minutes after each jump-start.

WARNING: Risk of explosion, ﬁ re or burns

The battery terminals exposed at the jump-start cable port

have enough energy present to cause a spark, creating

an explosion hazard, or to cause burns if a metal object

contacts both terminals. Always clip the plastic guard over

the port when not in use.

1 2 3 4 5 6 7 8 9 10 11 ... 46 47

Keine Kommentare

Duracell Powerpack 300 Spezifikationen Seite 6