Duracell Powerpack 300 Spezifikationen PDF herunterladen (Seite 26)

To operate a 12 V DC appliance:

1. Open the protective cover on the left side of the

Duracell

Powerpack.

2. Plug the 12 V DC appliance into the DC power socket

on the left side of the unit, and turn the 12 V DC

appliance on (if required). If the 12 V DC appliance

draws more than 12 A (or has a short-circuit defect),

the internal circuit breaker of the Duracell

Powerpack

shuts off the power to the 12 V DC appliance. If this

occurs, unplug the 12 V DC appliance, and the internal

circuit breaker automatically resets after a few seconds.

3. Fully recharge the Duracell

Powerpack as soon as

possible after each use.

As the DC power socket is internally wired directly to the internal

battery, extended operation of a 12 VDC appliance may result in

excessive battery discharge. See Caution for “Equipment damage”

on page 15.

Using the USB Ports

The USB Ports provide up to 2.1 Amps to charge USB

enabled devices such as cell phones, smartphones,

iPhones and iPads.

To charge USB devices:

Connect your USB device (smartphone, MP3 player, etc.)

to the USB port using the USB cable supplied with your

device. Charging will start and up to 2.1 Amps of current

can be supplied by the port. The USB device controls the

amount of current supplied. The Powerpack never “pushes”

more than required by the devices.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 46 47

Keine Kommentare

Duracell Powerpack 300 Spezifikationen Seite 26