Duracell POWERPACK 600 Spezifikationen PDF herunterladen (Seite 30)

Jump-Starting a Vehicle’s Engine

20 975-0213-01-01

Jump-Starting a Vehicle’s Engine

You can use the XPower Powerpack with the supplied jump-

start cables to jump-start a vehicle or boat engine that has a

12 V starting battery.

To jump-start a vehicle or boat engine:

1. Turn

OFF the vehicle or boat ignition and all accessories.

2. Engage the park or emergency brake and place the

transmission in park for an automatic or neutral for a

manual.

3. If jump-starting a boat engine, purge the engine

compartment and bilge of all fumes.

WARNING: Fire hazard

Never allow red and black clamps to touch each other or another

common metal conductor. This could cause damage to the unit and/

or create a sparking/explosion hazard. Always disconnect the

clamps from the unit after use and clip the plastic guard over the

jump-start cable port.

WARNING: Fire hazard

Jump-start cable clamps’ connection to the vehicle’s battery

terminals must be positive to positive (red clamp to battery “+”)

and negative to negative (black clamp to battery “–”). A reverse

polarity connection (positive to negative) may cause damage to the

unit and/or create a sparking/explosion hazard.

WARNING: Risk of explosion, fire or burns

The battery terminals exposed at the jump-start cable port have

enough energy present to cause a spark, creating an explosion

hazard, or to cause burns if a metal object contacts both terminals.

Always clip the plastic guard over the port when not in use.

Important: Closely follow these instructions for jump-starting

your vehicle because they may be different from the instructions

supplied with other products or jump-start cables.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 57 58

Keine Kommentare

Duracell POWERPACK 600 Spezifikationen Seite 30