Duracell POWERPACK300 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 54)

Troubleshooting Reference

The engine

being jump-

started will not

start.

Duracell® Powerpack

battery is not fully

charged.

The engine condition is

poor.

The engine start capacity

exceeds the Duracell®

Powerpack jump-start

capability.

Recharge the Duracell®

Powerpack battery.

Have the engine serviced.

Use a higher power Duracell®

Powerpack.

The jump-start

clamps

measure zero

volts.

Jump-start power switch is

OFF.

Duracell® Powerpack

battery needs to be

recharged.

Turn the jump-start power

switch

ON.

The

compressor

runs, but won’t

inflate.

The valve connector may

not be securely placed on

the valve stem.

The item being inflated

may have a leak.

Make sure the valve connector is

securely placed on the valve

stem before closing the thumb

latch.

Make sure the item being

inflated doesn’t have a leak.

Check the compressor hose for

any breaks or leaks.

The

compressor

runs slowly.

The compressor may have

overheated from excessive

use.

Battery voltage is too low.

Turn off the compressor and let it

cool down.

Check the condition of the

internal battery. The battery may

need to be recharged or replaced.

Table 5-1

Troubleshooting reference

Problem Possible Cause Solution

Duracell_PP_300_PlusEP.book Page 41 Wednesday, June 13, 2007 4:02 PM

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 62 63

Kommentare zu diesen Handbüchern

Keine Kommentare

Duracell POWERPACK300 Anleitung zur Fehlerbehebung Seite 54

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Netzteile und Wechselrichter Duracell POWERPACK300